Skip to product information
1 of 5

Ofokey.com

VHF/UHF Radio Modem RS485 Wireless Transceiver 20DBM 433mhz Transmitter and Receiver

VHF/UHF Radio Modem RS485 Wireless Transceiver 20DBM 433mhz Transmitter and Receiver

Regular price $15.99 USD
Regular price $22.39 USD Sale price $15.99 USD
Sale Sold out
Tax included.
Size

 
Product Name: VHF/UHF Radio Modem RS485 Wireless Transceiver 20DBM 433mhz Transmitter and Receiver
 
 
 
Package inlcuded:
1 PCS 433M-458M Multifunctional wireless RS485 transceiver(With shell)
 
 
Description:

Working voltage: 4.5V-5.5V;
Interface : RS485
Frequency: 433MHz
Transmit power: -40~+20dBm;
Receiver sensitivity: -114dBm;
Operating temperature: -25℃~+75℃;
Transparent transmission mode baud rate :1200 2400,4800,9600(Default),19200;
Open ground Transmission distance : 500M
Size(without antenna): 74x24x16mm
Weight(without antenna):18g


Module features
 
Long-distance wireless transmission (up to 500 meters in open area , 10kbps baud rate in the air )
Operating frequency range ( 433 - 458.5MHz , up to 255 communication channels)
Maximum 100mW ( 20dBm ) transmit power ( 10 levels of power can be set )
Built-in MCU, use serial port to communicate with external devices
Send 31 bytes at a time
The module can support one-to-one, one-to-many transparent transmission communication through ID setting
Changing the baud rate of a different serial port will synchronously change the rate at which data is sent over the air. ( 10kbps-100kbps)
Set the ''critical three minutes''. The module can send and receive data normally within three minutes of power-on. You can send the AT command '' AT+ENABLE=1 '' to make the module enter the AT command state for parameter setting. There is only this reserved word in these three minutes. After more than three minutes, you will not be able to enter the AT command mode, you can only send and receive data, '' AT+ENABLE=1'' will also be sent out as data, there are no reserved words at this time.
 



Recommend to buy more than 2pcs!!!


How to use (>=2pcs):

1 2PCS,Module 1 and Module 2 send data to each other.
 
2 >=3PCS,One as master device, the other as will be as slave device.
the way they work as well as wired RS485 bus. Master device transmit data, Slave devices all receive data.Any slave device transmit data, master device and the other slave devices can receive .When ever only allowed one device (master or slave) to transmit data.








 
 
 
 
 
Application
 
PTZ Camera
Modbus modbus temperature sensor
LED Controller
R4D3C32 N4D8B08 N4D8C12 RS485 Relay
Remote control, remote measurement system;
Wireless meter ;
Smart Home,Home Automation ,Wiser Home;
Access control ;
Identification system ;
Data collection;
IT household appliance ;
Intelligence household appliance;
Baby monitoring system;
Thermometer
 


 
 
View full details